The bedroom is one of the most important rooms in the house. Everything here should configure for rest and relaxation. That is why the decoration of the bedroom should be approached especially carefully. Make the interior more comfortable and cozy will turn out using suspended ceilings. However, it must be borne in mind that various materials can be used for these purposes.
Suspended ceiling
From drywall
This material is often used to create suspended ceilings in the bedroom. The fact is that it allows you to create complex structures in several levels and various configurations. In addition, gypsum cardboard, if necessary, can serve only the basis for further experiments. It levels the surface, which can then be processed with other materials. At the same time, it is convenient to alternate it, for example, with MDF or PVC panels. You can even combine stretch ceilings and drywall. Fantasy is not limited here.
Plasterboard and stretch fabric suspended ceiling
Suspended ceiling made of drywall and MDF
Plasterboard and PVC panels suspended ceiling
From MDF and PVC panels
Such materials such as MDF and PVC panels are quite widespread. In particular, PVC designs are mainly attracted by their appearance. They differ in a beautiful glossy surface, although they can, in principle, repeat the pattern of any finishing materials. Their cost is quite affordable.
PVC panels suspended ceiling
Also, unnecessary material costs for the acquisition of MDF panels are not required. In their appearance, they are very similar to a tree. Meanwhile, there are models made for marble, granite, sand or metal. True, MDF panels still recommend using not a very large area in the rooms, then it will be possible to avoid joining.
Suspended ceiling from MDF panels
How to make a ceiling design
The greatest difficulty is the designs made of drywall. Nevertheless, even based on this material, you can make a suspended ceiling yourself.
In order to get to work, you will need to buy some materials. So, the ceiling drywall, metal profiles, P-shaped fasteners, dowels, screws and screws will be required itself. It is worth buying a putty, as well as lamps, which will then be attached to the structure.
Drywall installation tools
Naturally, there should be such tools as a punch, knife for cutting material, screwdriver, building level and roulette to measure the area of the room.
The process of work begins with the preparation of the surface, on which the frame will then be attached. It should be very even so that the metal profile on it holds reliably. All defects can be removed using a perforator.
Cleaning the surface of the ceiling
Then the marking of the room is carried out. You need to understand where the frame will be mounted. Experts recommend placing it at a distance of 2. 5 cm from the main ceiling at least.
The marking of the room
Further, on the basis of measurements around the entire perimeter, a metal profile is installed.
Installation of a metal profile
It is fastened with the surface by means of P-shaped compounds. They should be placed at a distance of 50 cm from each other. Then fasteners are screwed on the profiles. So the frame is created.
Installation of the frame for drywall
Now you can start installing drywall. The sheets of the material should be laid very carefully. It is important that each of them is located in such a way as to completely close 5 transverse profiles. The 6th profile is obliged to cover the sheet half. By analogy, laying and other sheets are performed. They need to be fixed with self -tapping screws.
Hypsum cardboard mount
After the design is ready, you can proceed to its decoration. The most suitable option in this case is the wallpaper.
Playing drywall with wallpaper
Phased photos of the installation of a ceiling plinth
It should be emphasized that when finishing the suspended ceiling does not end at this. The necessary element is the installation of the ceiling plinth.
Ceiling baseboard
It is needed in order to mask the lungs of some errors that may occur when connecting the ceiling and wall surfaces. In addition, thanks to the ceiling skirting board, it also becomes possible to install LED ribbons. Typically, such designs are made of foam. They are represented in various colors, so choosing a suitable shade will not be much difficulty.
GKL ceiling decoration LED ribbons
Before starting installation, you will also have to purchase an adhesive and check so that the surface to which the skirting board will be attached to have an even surface without defects.
It is necessary to start installing a ceiling skirting board from the very open corner in the room. The material is placed into the cavity of the cavity and is sawn at an angle of 45 degrees.
Cutting skirting boards for joining in the corners
Glue is applied to the wrong surface of the plinth.
Application of glue to skirting
Then the material is tightly pressed to the corner.
Fastening of the ceiling plinth
Substitute mount to the outer corner
According to the same principle, the skirting board is located in other corners. And only then the elements in the straight section are installed.
Gluing a ceiling skirting board in a straight section
If the dimensions of the skirting board exceed the necessary ones, then the elements can be adjusted by means of a hacksaw for metal or an electric lobe.
Suspended bedroom ceilings: Choosing design, how to make a ceiling design with your own hands, installation of a ceiling plinth.