DIY bulk decorative floors

Decorative bulk floors are very often used in private houses or apartments. They have good properties, so you can embody any design ideas using different colors and decorative compositions. Another feature for which such floors appreciate is that they are a whole coating without any gaps and cracks. According to their characteristics, they often win in other floor coverings, such as laminate, parquet or linoleum, combining not only decorative properties, but also reliability and durability. Such floors can be done with your own hands, this does not require any special knowledge. Therefore, you can realize your own ideas about the design of your apartment or at home. You can achieve high quality if you follow simple instructions and not miss any steps, then your bulk floor will not give in to the quality of any other. So, you purchased a decorative bulk floor and decided to make it yourself. You must decide what you want to get in the end, evaluate the parameters of the room and then you can start business. Perhaps it is worth redeeming everything again so that then there are no unpleasant surprises. If everything is in order, then you can start. First you need to prepare the grounds for the future bulk floor, which will serve as a kind of foundation. To make it, you need to remove the previous floor, completely remove the wooden coating, and then carefully and carefully smear all the cracks, cracks and holes. Accordingly, it will also be necessary to clean everything from garbage, remove the remains of the previous coating and clean everything from the husk. After that, the surface is ready for filling the new sex. It must be remembered that polyurethane floors require a good base, both quality and durability depend on it. The most common problems are associated with a poor -quality basis for the floor. Therefore, before pouring the floor, the working surface must be thoroughly primed. It is also necessary to ensure better adhesion of the polymer floor with concrete at the base. On this, all the main preparatory measures finish, you can proceed to the preparation of the solution and pour the floors. When you will harvest the solution, carefully monitor the proportions and dosage, follow the instructions and then you will get a mixture of the necessary quality and consistency, from which you get strong and even floors. When the mixture is ready, you can start pouring the solution. It spills neatly and exactly over the entire prepared surface. Make sure that garbage or extraneous objects do not get into the mixture. For the mixture to fall evenly, you need to get rid of air bubbles. This is very important because they can greatly ruin the final result. To do this, you can use a regular roller. While filling, help yourself with a roller, gently rolling the mixture and squeezing out the bubbles. This ends another stage in the creation of a bulk floor – the so -called base layer is ready, the so -called, base. After that, you can start creating a directly decorative layer. Perhaps this is exactly what the decision was made to create exactly the bulk floor. All design ideas are carried out here. The final stage in the creation of a decorative bulk floor with your own hands is the application of the last, the upper layer of polyurethane varnish. It increases strength, increases the wear resistance of the floor, protects the decorative layer. This varnish is able to increase the chemical resistance of the coating. If you correctly followed all the instructions, then you will get not only a beautiful floor, but also a reliable one that will last you for many years.