DIY

Burning or self -leveling floors are today for country houses and apartments the most excellent option. Such floors are easy to arrange and at the same time environmentally friendly. On the floor you do not need to put any other material. Its appearance is beautiful and has perfect evenness. Since the bulk floor has no seams, it is considered hygienic and it is very easy to wash. To put the floor styling with your own hands, it is necessary to carefully clean the surface before pouring the floor. To do this, clean the surface of the oils, glue, the remains of the old paint. These residues can poorly affect the base under the bulk floor, as the clutch and strength can weaken. All existing protrusions need to be removed, put off the depressions and smooth the irregularity. The floor should look carefully prepared. This will contribute to the fact that the base of the bulk floor will look good, and at the same time it will not have foaming areas formed on it of bubbles, but will have the perfect surface. All this will depend on the correctly fulfilled requirements for laying the bulk floor. After that, you need to thoroughly primed the surface of the floor. As soon as you carry out preliminary work, proceed to the formation of the level of future sex, applying special beacons. At the same time, you need to use the level. After installing the guides of the beacons, you can pour the floor using a special unit to spill the floors. Using a wide spatula, level the spilled solution while making a movement, in your direction starting from the opposite wall. At the same time, each site must be filled separately to avoid bubbles and voids. After you pour the floor with a solution, it should not be touched for two days. Try to make so that the sun’s rays do not fall on the floor, and it does not blow out with a draft. The hardening of the floor will occur in four weeks. The flood floors can be different: polyurethane, acrylic, on essential oils and polyurethane. All of them can serve for a long time and at the same time have excellent performance characteristics. On an organic basis, the bulk floors are very expensive. Still bulk floors remain the most economical, floors on a cement basis. The floor should include not only cement, but special additives that can make the solution unique. Such floors can have different thicknesses, everything will depend on the errors that were at the old sex, at its base and place where it is applied. It will not be necessary to use additional coating on the floors on a cement basis. The reason will be that if there is no special mixture, this will not help maintain the floor from abrasion. It is very convenient to work with bulk floors. And if you decide to make such floors in your house, then for this there is the above way of laying a bulk floor. At the same time, do not forget that you can use bulk mixtures for deep alignment of the surface, the filling of the floor with the finishing mixture, the layer of which should be from 0, 5 to 10 mm. Applying them you, give the floor perfect evenness.