All purchased wallpaper must be carefully reviewed, sorted and sorted by tonality and shade.
The wallpaper glued to the walls in a prominent place should not differ in tone. If there are rolls with small differences, they can be used in places closed by furniture. Then the wallpaper must be cut into strips of the required length with a small margin of 1-2 cm. In this case, it is necessary to ensure that all the stripes begin with one drawing. If a large drawing, it is necessary to provide the necessary stock.
The first lane must be glued by drawing a line on the wall with a plumb line. Gluing always start from the window. First glue whole stripes. Then, sections over the windows, door boxes and heating radiators are glued from the remains.
Two people usually do wallpaper. One stands in the scaffold of the second gives him stripes and helps to smooth the canvases on the wall with a sponge. When gluing wallpaper, it is necessary to monitor that there are no drafts. If you have failed to drive out and get rid of air bubbles, they can be pierced with a needle. Glue, which accidentally crawled out behind the edges of the wallpaper, must be immediately wiped off.
To be sure of a qualitative result, you need to buy only high -quality glue and wallpaper in specialized stores. The lower edge of the paintings is cut using a carpentry knife along the edge of the skirting board. If, after drying, where the non -glued sections turned out to be glued with PVA glue, only very carefully. After the end of the work, you can call, someone, from outsiders and listen to criticism.