Partitions made of drywall
Owners of apartments and offices may always have a need to divide the room or burn out a small room for storing some property. How to be? Lay out a brick wall? But brickwork is very heavy and can cause deformation of the building. In addition, this requires special permission, and the work itself takes a lot of time and is associated with dirt and dust.
There is a great solution to this problem. Such partitions can be installed quickly, cleanly and without asking anyone for permission, since they are not an element of redevelopment. You can install partitions from drywall in just one day. Partication installation technology is simple. At the first stage, measurements, calculations and purchase of the necessary material are made. Next, marking the future partition on the floor, walls and ceiling is carried out. After that, special supporting profiles are attached to them and the partition frame is installed. When installing the frame, it is important not to forget to put in it the future wiring for sockets and switches. To prevent an unpleasant creak, which can occur in the process of temperature deformation, it is recommended to glue the places of the joints of the profiles with electrical tape.
Когда мероприятия по подготовке каркаса закончены на него крепятся листы гипсокартона. If the partition is installed in a room with high humidity, then drywall must be pre -treated with a special solution. Fastening is carried out using a screwdriver and screws. The hats of self -tapping screws when screwing must be shed at least by a millimeter. After installation of the first layer of the wall, sound insulation is installed. At the end of the installation of the wall, the joints between the sheets and the holes from the screws. To avoid the appearance of cracks, the joints between the sheets are strengthened by a painting grid. In conclusion, the final wall decoration is carried out.