The issue of heating in a private house has always been and it will be relevant it is very difficult to choose and install a heating device, it should also be effective and safe. Modern infrared ceiling heating systems is an excellent alternative to all previously existing options.
Ceiling infrared heater
Today in Russia, unique devices are made, which are attached to the ceiling and are able to ensure the room in high -quality warmth in a short time. They do not take up much space and are absolutely safe to use. Residents of Europe have long appreciated the convenience of using this invention, but foreign models are not much different from the development of a domestic manufacturer. In addition, Russian equipment is much cheaper than its foreign counterparts.
The advantages of ecoline heating systems:
The heating principle of an ecoline system resembles the sun regarding the earth. He disperses heat around the room, heating all the objects surrounding it, which in turn reflect the heat.
The principle of heating
When working in the environment, there is no release of any substances. It does not take up space at all, unlike other heating systems, does not require maintenance and constant control.
This system consumes electricity 70% less, any other heating device, which indicates its efficiency.
The system is installed on the ceiling, it does not spoil the appearance of the room. Its operating life reaches 25 years, this fact is regulated by the manufacturer.
Work system
All ecoline manufacturer models have different power. You can choose it based on the area of the heated room. Its installation takes only a few minutes, if desired, it can be removed for a while, then hang it again.
Fastening IR heater
You can use the device in a room with high humidity, for example, in greenhouses. It does not radiate any energy that can affect plant growth.
You can control the “weather in the house” using the regulator.
A set of IR heater
The choice of models of ecoline is quite wide, each buyer can choose the device suitable specifically for its room. This is especially beneficial for heating country houses in the winter period.
Heater in a country house
How to choose the right heater
All devices have different power, the higher it, the greater its performance. For a dwelling, you should not purchase a heater with a capacity of above 800 kW.
All heaters are divided into two types: long -wave and short -wave. Ecoline belongs to long -wave devices, their metal plate does not heat up, so it is fireproof, the minimum possible placement from objects is 50 cm or more.
Long -wave IR heater
Short -wave devices have a spiral structure, they are suitable only for rooms with high ceilings no 3 m.
Short -wave IR heater
How to install ceiling infrared heaters Ecoline with your own hands
The design is attached to the ceiling using dowels, they are included with the device. There is a bracket with holes on the device itself. This work is quite simple and does not require special skills.
Bracket with holes
It is very important to take into account that the operating temperature of the surface is quite high, so the device should be fixed where contact of the surface of the device with human skin will be completely excluded. The height of the ceilings should be about 2, 5 meters.
Ecoline heater on the balcony
Next, the device is connected to the outlet, it will work constantly. A distinctive feature of the Ecoline system is that the power of its work can be controlled independently.
A few simple rules with independent installation:
You can fix the device only with component fasteners.
Mount in a wooden ceiling
Near the heating device there should not be easily igniting items.
The wiring in the house should be completely working and isolated.
You can fix this device to any ceiling. It can be placed even in a cell of a suspended ceiling from panels or drywall.
How to sheathe the ceiling with drywall and plastic panels
These two options for finishing the ceiling have a relatively low cost and a lot of operational qualities. Differences are also available, for example, drywall requires additional finishes after installation work. Installation of both structures begins with the installation of the frame.
The frame of the suspended ceiling
Installation of plastic panels
For work you will need:
Plastic panels;
Finish panels;
Drill, stationery knife or electrician;
Wooden profiles and screws;
Stapler and brackets.
Performing work step by step:
Wooden rails 2–2, 5 cm thick are mounted with screws or dowels with nails to the ceiling, plastic panels will be held on them. Creating a supporting structure should be along the entire perimeter of the ceiling, plus the guide rails along the entire surface at a distance of 50 cm from each other. It is very important that the guides lie down exactly relative to each other, so that the ceiling subsequently has a perfectly smooth surface.
Installation of the ceiling frame
The panels are mounted perpendicular to the guide rails, respectively, the distance between the fasteners will be approximately 50 cm.
Installation of perpendicular guides
Start the casing with the finish panel, the fastening should be carried out by the construction stapler.
Plastic panels mount on the ceiling
You can cut the panels with a sharp clerical knife or electrician. The panels are attached to each other according to the spike-paz system, each new element is inserted into the protruding edge of the previous panel. And its protruding land with the help of a sorcerer is mounted to the guide rail.
Thus, the design is assembled to the last panel. At the end of the edge, the perimeter should be designed with ceiling plinths.
Installation of ceiling skirting boards
Hypsum plasterboard installation
The principle of operation is the same, it is necessary to first build a supporting structure. For its construction, you can use wooden or metal profiles. The frame for drywall should have transverse and longitudinal guides.
Hypsum cardboard frame
It is important to take into account that the weight of the drywall is much larger than plastic panels, so the structure should be durable to take out a large load.
Multi -level drywall ceiling
Drywall sheets are attached to the frame using screws, the step between the mounts is approximately 15 cm. Hats from screws must be slightly “drowned” in the surface of the sheets.
Plasterboard fastening scheme to the ceiling
It should be joined by sheets at a distance of 1-2 mm, so that these joints are more convenient to putty after the end of the finish.