Construction councils
Despite the fact that wooden houses are attributed to light structures, it requires a strong and reliable foundation. In this case, the soil on which it will be erected is of particular importance. The study of soil is important in order to provide features of shrinkage and other factors that can affect the stability of the structure of a wooden house.
If the soil is not inclined to mobility, then simple constructions of the foundation are chosen, slightly deepening them. The foundation is made on a sand pillow at a depth of up to half a meter and a little more. When the structure is not designated, it is made more monumental, placing large bottled stones on a sand pillow or day of trenches. But they cannot be laid on crushed stone to avoid destruction.
With small pressure on the ground, a columnar foundation is used. It consists of a system of tightly installed pillars. Moreover, they must be located at the intersections of the ceilings and at the corners of the house. They are sometimes made of wood. However, stone analogues are more durable. If you are interested in Fittings of PND Price, then we advise you to go through the link we specified. There you can find out the prices for PND fittings.
Repair of the foundation under the house made of wood (for example, timber) is carried out, strengthening the structure in places of the highest pressure. If additional elements are installed, they must be firmly connected to the existing parts of the foundation that will not be replaced. Strengthening the strength characteristics is also possible by filling with concrete of individual sections of the foundation and places most exposed to load. At the same time, it is important to waterproof the foundation and compact the adjacent soil.
When replacing the dismantling, it is carried out alternately on every corner of the house with the substitution of the jack and temporarily holding pillars. Then the sides are disassembled. The analysis technology will depend on the materials that were used during installation. If it was a brick, then disassembly is carried out carefully so that suitable bricks can be used in the new masonry. If this is cement, then it is split with the help of wedges and is completely removed.