DIY bath furniture

A bathhouse is a place where we bathe, we get down. Bans are different. There are brick baths, a bar of a bar, a banks from a log. There are even baths on wheels. Baths are national. For example, Turkish or our Russian. This is a room that should include comfortable furniture. Many people make furniture for a bath with their own hands. If you built a bathhouse on your site, then it must be furnished with furniture. The question arises, why spend money on furniture, if you can collect it yourself? Let’s try to figure out how to collect furniture for a bath with your own hands. First you need to choose wood. It should be moisture resistant and to a small degree of thermal pipeline. In addition, the tree should be durable. There should not be cracks and knots on the wood. Almost all deciduous rocks are suitable in order to collect furniture for the bath with your own hands. Professional masters advise using linden, aspen or poplar wood. These are soft trees. But you can use solid rocks. Professional masters say that it is best to use the wood of the African wood of Abashi. But it is very expensive and not everyone can afford. Our Russian masters, collecting furniture for the bath with their own hands, from ancient times used wood of birch. Masters recommend making oak and pine, that furniture that will be most susceptible to moisture. For example: shops, tables and chairs. Oak and pine strong material that perfectly withstand excessive humidity. Although in my opinion it is better not to use the pine tree at all, since it emits the resin, and that, in turn, negatively affects the manufacture of good furniture for the bath with her own hands. To build hangers, various stands and sun loungers, deciduous rocks are suitable. For example, birch or aspen. Birch furniture gives the aroma, and besides, it is easier and more convenient to take it into the air. It is recommended not to apply varnish for bath furniture with your own hands. It will be split from humidity, especially at the legs of furniture. You can cut products with a simple saw, but it is better and more correct to work with an electrician. After cutting on a tree, there are nanoses and irregularities. They need to be treated with sandpaper. For convenience, sandpaper wrap any tree block. So it will be easier to wait. Finished products are attached with screws. You can tighten the screws with a screwdriver. It is advisable to use screws from stainless steel. Hats of screws must be pressed into a tree so that they are not visible. To do this, before wrapping a screw, a large hole of the drill needs to make a small hole where the screw hat will fit. So what kind of furniture for the bath we will collect with our own hands? As for the appearance, it all depends on your taste. Maybe you want to have folding furniture? Or dear and catchy? Or maybe simple and elegant? The most important thing is that furniture must be reliable and serve for a long time. I think everyone will agree with this. A traditional set of furniture for baths with your own hands includes: table, several chairs, a couple of shops and shelves. Before going to the store to buy building materials, you need to think about your expenses. Save on everything except quality. Let’s start with the steam room. Do not forget that sunbeds and shops must stand in the steam room. Also, do not forget to build a wooden staircase for the pool. This staircase will give convenience and a comfortable view of the pool. By the way, instead of the pool there may be a font. After bathing, all furniture, except for shelves, must be taken to the air for drying. So it will serve longer. Having made once a bath for a bath with your own hands, you will feel a surge of strength to build a new furniture. Various frames for mirrors, buckets, etc. D.