Installation of hoods
For rooms such as a bathroom or kitchen, ventilation is of paramount importance. And, if there can only be high humidity in the bathroom, then in the kitchen there is still a need to remove fat and smells. To eliminate all these negative factors, we recommend using a ventilation hood, which is better to put, making a kitchen repair. Such an extract is a regular fan fixed either to the plastic panel, or directly into the channel – the pipe of the corresponding diameter. You can purchase hoods in any construction store. Do not choose a model, the dimensions of the output of which will exceed the size of the ventilation shaft. In terms of dimensions, the following categories of hoods are distinguished – 100, 150, 200mm – the diameter of the output. The larger the diameter, the more powerful the engine is and more efficiently hood.
Choose an hood based on the dimensions of the room, or rather a cubic meter of air. There are hoods with a built -in delay timer – their wiring is brought to the switch. After the light is stewed in the room, such an extract continues to work for 3, 5 or 10 minutes, depending on the time exhibited on the timer. Before mounting the hood, thoroughly clean the shaft to achieve better traction. Then, the holes should be drilled under the fasteners of the hood.
The food wire will help you hide the cable – the channel that can always be purchased in the same place as the hood. Bring the wiring to the switch or use the usual plug fork. Screw the front panel of the product with self -tapping screws to the wall. You just have to set the delay timer if it is present in your model, and then snap a decorative front panel.
How to connect the wiring to the product is described in great detail in the instructions supplied along with the hood. Typically, the cost of installing hoods does not significantly affect the repair of apartments of prices, but you still clarify this issue.