One of the simplest methods of wall cladding with drywall is performed using glue. First you need to prepare the walls for facing, cleaning it of pollution and, if necessary, drying. If you apply glue to a metal surface, treat it with an anti -corrosion substance before starting work. Since smooth concrete walls almost do not absorb moisture, then for better adhesion they are pre -treated with a primer. Then the glue is applied to the surface of the drywall slab – here a special gear spatula is used. Then we put the plate to the gluing place and press on the wall. Between the lower edge of the sheet and the floor, it is necessary to leave the gap. For better grasping, the plate must be tapped in the places of applying glue with a special rubber kiyanka.
In order to glue a drywall on an uneven brick or block wall, it is necessary to apply glue to two layers. Using a trowel, apply glue pointwise in the middle of the stove and throughout its perimeter. In order to glue a piece of drywall simply on a narrow area, it is necessary to apply glue to the wall itself. When you apply glue, press the plasterboard plate to the wall.